How to Get Grease Out of Carpet | Step by Step CleanerPicks Guide

Removing grease from a carpet isn’t a walk in the park. It really is a tedious task because grease stains are easy to spread out all over the carpet when wiped. Before we move further from this point, it would be prudent to understand what grease is and its common origin.

So, what is grease and where does it come from? In a layman’s language I can define grease as a thick, oil-like structure that usually originates from soft or melted animal fat. Those who are fond of cars, bikes and other motor vehicles have probably had grease on their shirt, trousers and even carpet.

See Also: How to Get Slime Out of Carpet

In this article snippet, we’re going to provide a step-by-step DIY guide on how to get grease out of carpet. As is expected, grease stains are stubborn to eliminate but this guide will prove handy in getting rid of it using items commonly found at home. And since grease is sticky and vicious, it is imperative to eliminate it as soon as it touches the carpet.

The Necessities:

  • Dish Soap
  • Baking Soda
  • Dull Knife
  • Vacuum Cleaner
  • Cotton Cloth
  • Toothbrush
  • Water
  • Spray Bottle

how to get grease out of carpet

Effective Step-By-Step Guide To Remove Grease Stains From Carpet

Method One: Using a Combination of Baking Soda and Dish Soap

  1. Scrub the excess stains away

The first thing to do is to scrub away the excess grease stains using a dull knife. Make sure to scrub it away as much as possible before you head to the next step. Remember, scrubbing the stain thoroughly will help in minimizing it so it becomes easy to deal with it in the next stage.

See Also: How to Get Old Dog Urine Stains and Smell Out of Carpet

2. Apply baking soda to the stain

Baking soda helps to get grease off of your carpet. Sprinkle a generous amount of baking soda over the stain. Allow it to sit for about one hour. Letting it rest for one hour is important because grease will have ample time to absorb oil from the stain. Baking soda serves as an absorbent, which is influential in soaking up moisture from the grease.

See Also: How to Clean Leather Car Seats

3. Vacuum 

In this step, you’re required to suck the baking soda out of the carpet by running a vacuum cleaner over the stain. Vacuuming the stain thoroughly removes the powder to the last bit.

See Also: How to Clean Bamboo Floors

4. Apply the dish soap

Squirt a small amount of dish-washing soap to the stained area and spread it evenly. You may need to use a soft-bristled toothbrush to spread the dish soap uniformly over the stained section of the carpet. Scrub the grease-stained spot and work the dish-washing soap deep into the carpet fibers.

Note: Always use a small amount of dish soap. Applying a lot of it could delay the cleaning process.

5. Rinse the stain with water

Spray a little amount of water on the area affected by grease stains. Then, blot it up as much as possible using a clean cloth. Repeat this step as many times as possible until no single soap is visible on the carpet.

Method Two: Using a Combination of Vinegar and Dish Soap

What You-need:

  • Vinegar
  • Dish Soap
  • Dull Knife
  • Paper Towels
  • Spray Bottle
  • Water
  • An Old Toothbrush

Steps To Follow:

1. Get rid of the excess grease

Eliminate as much grease as possible by scrubbing it off using a dull knife.

2. Apply vinegar to the stain

Having scrubbed the excess stain, you now need to pour a generous amount of vinegar over the area stained with grease. Blot up as much of the grease stain as possible using paper towels. Continue blotting until no stain can be seen on the paper towel any more.

3. Wash the carpet and rinse

Pour a little dish soap over the grease-laden area and rub it gently using a toothbrush with soft bristles. Brushing the area affected with grease will break up the stain and remove any traces of grease left on the carpet. Once all the stain has been removed, you can rinse off your carpet with clean water. Lastly, dry your carpet before use.

Method Three: Using Rubbing Alcohol

What You Need:

  • Dull Knife
  • Rubbing Alcohol
  • Paper Towels

Steps To Follow:

1. Remove the excess grease

Scrub off the excess stain using a dull knife. Scrub away as much of the stain as possible for complete removal and to get your carpet sparkling again.

2. Apply rubbing alcohol

Pour a generous volume of rubbing alcohol over the stain. Using paper towels-blot it up continuously until there is no more leftover or residue on the carpet. Make sure you do this until your paper towel comes out clean. Rubbing alcohol acts as a solvent which dissolves the stain and separates it from the fibers of your carpet.

Leave a Comment